Escape Exit Door Solution For Double Door

Escape Exit Door Solution For Double Door

The escape pole is a device used for emergency escape. It usually has specific designs and usage methods to help people evacuate quickly and safely in emergency situations.

UL Number of Door Hardware
	R41383
	R41361/SA46258
	R41359

The following is an example of EC Hardware a solution for the hardware fittings of a double-door emergency exit door. You can adjust and improve it according to the actual situation:

I. Hardware accessory selection

1.  Door lock: Select a push-bar type door lock with an emergency escape function. In an emergency, people only need to push the crossbar to quickly open the door.

2.  Hinges: Use high-strength stainless steel hinges to ensure that the door can be opened and closed flexibly and can withstand considerable pressure.

3.  Door closer: Install a door closer with speed adjustment function. During daily use, the door can close slowly to prevent injury caused by the sudden closing of the door. In case of fire or other emergencies, it can automatically close to play the role of fire and smoke insulation.

4. Panic Exit Device

The escape pole is a device used for emergency escape. It usually has specific designs and usage methods to help people evacuate quickly and safely in emergency situations.

II. Installation key points

1. The installation position of the door lock should be convenient for people to operate, and the height should be moderate, in line with ergonomic principles.

2. The number and position of the hinges' installation should be reasonably determined based on the weight and size of the door to ensure the stability and balance of the door.

3. The installation of the door closer should ensure that its force can effectively close the door. At the same time, the closing speed should be adjusted to avoid too fast or too slow closing.

III. Maintenance and inspection

1. Regularly inspect the flexibility and reliability of the door lock to ensure smooth push-bar operation and no jamming of the lock core.

2. Check the tightness of the hinges. If they are loose, tighten them in time. At the same time, check whether the hinges are worn or deformed.

3. Test the function of the door closer, adjust the speed and force to ensure its normal operation. Regularly add lubricating oil to the door closer to extend its service life.

IV. Identification and warning

1. Post obvious operation signs near the door lock to guide people to open the door correctly in an emergency.

2. Set warning signs around the door to remind people not to block the escape passage and prevent the normal opening and closing of the door.

Through the selection, installation, maintenance and identification settings of the above hardware accessories, a reliable guarantee can be provided for the single-door escape exit to ensure that people can evacuate quickly and safely in an emergency.